Double-row angular contact ball bearings are very sensitive to ring misalignment. They are produced in two versions according to the size of the contact angle.

The 32… J and 33… J series have a contact angle of 32° and a cage pressed from sheet steel. They have filling grooves on one side. Therefore, they should be mounted so that the predominant axial force loads a row of balls on the side without filling grooves.

The 32… BTNG and 33… BTNG have a contact angle of 25° and a cage made of glass fibre reinforced polyamide 66. These bearings do not have filling grooves and can therefore transmit axial loads in both directions.

Double-row angular contact ball bearings with the additional designation BTNG are available in the open version, and also with shields or seals on one or both sides. All bearings of types 32… BTNG and 33… BTNG are supplied with lubricating grease as standard. For operating temperatures above 110°C, steel cage bearings are used.

Bearing series: 32.., 33.., 52.., 53..

Sealed double row angular contact ball bearings

d 10 – 75 mm

d 0.394 – 2.953 in

 

 

Principal dimensions Basic load ratings  Fatigue Limiting speeds Mass Designations

dynamic   static load Bearing with Bearing with

limit shields seals shields seals

d D B d D B C C₀ P_u

mm in kN kN r/min kg –

 

10	30	14	0.394	1.181	0.551	7.61	4.3	0.183	24 000	17 000	0.051	3200 A-2Z	3200 A-2RS1
12	32	15.9	0.472	1.260	0.626	10.1	5.6	0.24	22 000	15 000	0.058	3201 A-2Z	3201 A-2RS1
15	35	15.9	0.591	1.378	0.626	11.2	6.8	0.285	18 000	14 000	0.066	3202 A-2Z	3202 A-2RS1
	42	19		1.654	0.748	15.1	9.3	0.4	16 000	12 000	0.13	3302 A-2Z	3302 A-2RS1
17	40	17.5	0.669	1.575	0.689	14.3	8.8	0.365	16 000	12 000	0.1	3203 A-2Z	3203 A-2RS1
	47	22.2		1.850	0.874	21.6	12.7	0.54	14 000	11 000	0.18	3303 A-2Z	3303 A-2RS1
20	47	20.6	0.787	1.850	0.811	20	12	0.51	14 000	10 000	0.16	* 3204 A-2Z	* 3204 A-2RS1
	52	22.2		2.047	0.874	23.6	14.6	0.62	13 000	9 000	0.22	* 3304 A-2Z	* 3304 A-2RS1
25	52	20.6	0.984	2.047	0.811	21.6	14.3	0.6	12 000	8 500	0.18	* 3205 A-2Z	* 3205 A-2RS1
	62	25.4		2.441	1.000	32	20.4	0.865	11 000	7 500	0.35	* 3305 A-2Z	* 3305 A-2RS1
30	62	23.8	1.181	2.441	0.937	30	20.4	0.865	10 000	7 500	0.29	* 3206 A-2Z	* 3206 A-2RS1
	72	30.2		2.835	1.189	41.5	27.5	1.16	9 000	6 300	0.52	* 3306 A-2Z	* 3306 A-2RS1
35	72	27	1.378	2.835	1.063	40	28	1.18	9 000	6 300	0.44	* 3207 A-2Z	* 3207 A-2RS1
	80	34.9		3.150	1.374	52	35.5	1.5	8 500	6 000	0.73	* 3307 A-2Z	* 3307 A-2RS1
40	80	30.2	1.575	3.150	1.189	47.5	34	1.43	8 000	5 600	0.57	* 3208 A-2Z	* 3208 A-2RS1
	90	36.5		3.543	1.437	64	44	1.86	7 500	5 000	0.93	* 3308 A-2Z	* 3308 A-2RS1
45	85	30.2	1.772	3.346	1.189	51	39	1.63	7 500	5 300	0.63	* 3209 A-2Z	* 3209 A-2RS1
	100	39.7		3.937	1.563	75	53	2.24	6 700	4 800	1.25	* 3309 A-2Z	* 3309 A-2RS1
50	90	30.2	1.969	3.543	1.189	51	39	1.66	7 000	4 800	0.65	* 3210 A-2Z	* 3210 A-2RS1
	110	44.4		4.331	1.748	90	64	2.75	6 000	4 300	1.7	* 3310 A-2Z	* 3310 A-2RS1
55	100	33.3	2.165	3.937	1.311	60	47.5	2	6 300	4 500	0.91	* 3211 A-2Z	* 3211 A-2RS1
	120	49.2		4.724	1.937	112	81.5	3.45	5 300	3 800	2.65	* 3311 A-2Z	* 3311 A-2RS1
60	110	36.5	2.362	4.331	1.437	73.5	58.5	2.5	5 600	4 000	1.2	* 3212 A-2Z	* 3212 A-2RS1
	130	54		5.118	2.126	127	95	4.05	5 000	–	2.8	* 3312 A-2Z	–
65	120	38.1	2.559	4.724	1.500	80.6	73.5	3.1	4 800	3 600	1.75	3213 A-2Z	3213 A-2RS1
	140	58.7		5.512	2.311	146	110	4.55	4 500	–	4.1	* 3313 A-2Z	–
70	125	39.7	2.756	4.921	1.563	88.4	80	3.4	4 500	–	1.9	3214 A-2Z	–
	150	63.5		5.906	2.500	153	125	5	4 000	–	5.05	3314 A-2Z	–
75	130	41.3	2.953	5.118	1.626	95.6	88	3.75	4 500	–	2.1	3215 A-2Z	–
	160	68.3		6.299	2.689	176	140	5.5	4 000	–	5.6	* 3315 A-2Z	–

Double row angular contact ball bearings

Double Row, 30° Contact Angle Max Type

Open, Sealed, Shielded, Snap Ring Series: 5205 E — 5218 E

Size: 25 mm — 90 mm

0.9843 in — 3.5433 in

 

Series: 5305 E — 5316 E

Size: 25 mm — 80 mm

0.9843 in — 3.1496 in

 

 

 

 

 

 

 

 

Designation Principal Dimensions						Basic Load Ratings Dynamic Static				Speed Rating Lubrication				Mass
d D					B	C C0				Seal Grease Oil
	mm	in	mm	in	mm	in	N	lbf	N	lbf	r/min	r/min	r/min	kg	lb
5205 E	25	0.9843	52	2.0472	20.6	13/16	22 900	5 150	21 200	4 770	8 000	8 000	11 000	0.25	0.55
5206 E	30	1.1811	62	2.4409	23.8	15/16	30 300	6 820	28 000	6 290	7 000	7 000	9 500	0.35	0.77
5207 E	35	1.3780	72	2.8346	27.0	1-1/16	39 100	8 800	36 500	8 210	6 000	6 000	8 000	0.54	1.20
5208 E	40	1.5748	80	3.1496	30.2	1-3/16	49 500	11 100	49 000	11 000	5 600	5 600	7 500	0.73	1.60
5209 E	45	1.7717	85	3.3465	30.2	1-3/16	51 200	11 500	54 000	12 100	5 000	5 000	6 700	0.77	1.70
5210 E	50	1.9685	90	3.5433	30.2	1-3/16	53 900	12 100	58 500	13 200	4 800	4 800	6 300	0.82	1.80
5211 E	55	2.1654	100	3.9370	33.3	1-5/16	66 000	14 900	76 500	17 200	4 300	4 300	5 600	1.15	2.55
5212 E	60	2.3622	110	4.3307	36.5	1-7/16	78 100	17 600	88 000	19 800	3 800	3 800	5 000	1.50	3.30
5213 E	65	2.5591	120	4.7244	38.1	1-1/2	88 000	19 800	106 000	23 800	3 600	3 600	4 800	1.95	4.30
5214 E	70	2.7559	125	4.9213	39.7	1-9/16	101 000	22 700	125 000	28 100	3 200	3 200	4 300	2.15	4.75
5215 E	75	2.9528	130	5.1181	41.3	1-5/8	108 000	24 300	137 000	30 800	3 200	3 200	4 300	2.50	5.50
5216 E	80	3.1496	140	5.5118	44.4	1-3/4	128 000	28 800	160 000	36 000	–	2 800	3 800	3.00	6.60
5217 E	85	3.3465	150	5.9055	49.2	1-15/16	142 000	32 000	176 000	39 600	–	2 600	3 600	3.70	8.15
5218 E	90	3.5433	160	6.2992	52.4	2-1/16	151 000	34 000	193 000	43 400	–	2 400	3 400	4.55	10.00

 

 

 

 

5305 E	25	0.9843	62	2.4409	25.4	1	34 100	7 670	30 500	6 860	7 500	7 500	10 000	0.39	0.86
5306 E	30	1.1811	72	2.8346	30.2	1-3/16	46 800	10 500	43 000	9 670	6 300	6 300	8 500	0.59	1.30
5307 E	35	1.3780	80	3.1496	34.9	1-3/8	52 300	11 800	48 000	10 800	5 600	5 600	7 500	0.86	1.90
5308 E	40	1.5748	90	3.5433	36.5	1-7/16	67 100	15 100	65 500	14 700	5 000	5 000	6 700	1.15	2.55
5309 E	45	1.7717	100	3.9370	39.7	1-9/16	80 900	18 200	80 000	18 000	4 500	4 500	7 000	1.50	3.30
5310 E	50	1.9685	110	4.3307	44.4	1-3/4	95 200	21 400	95 000	21 400	4 000	4 000	5 300	2.00	4.40
5311 E	55	2.1654	120	4.7244	49.2	1-15/16	119 000	26 800	122 000	27 400	3 800	3 800	5 000	2.65	5.85
5312 E	60	2.3622	130	5.1181	54.0	2-1/8	134 000	30 200	143 000	32 100	3 400	3 400	4 500	3.30	7.30
5313 E	65	2.5591	140	5.5118	58.7	2-5/16	154 000	34 700	163 000	36 600	3 200	3 200	4 300	4.20	9.25
5314 E	70	2.7559	150	5.9055	63.5	2-1/2	172 000	38 700	186 000	41 800	2 800	2 800	3 800	5.00	11.00
5315 E	75	2.9528	160	6.2992	68.3	2-11/16	187 000	42 100	208 000	46 800	–	2 600	3 600	6.35	14.00
5316 E	80	3.1496	170	6.6929	68.3	2-11/16	201 000	45 200	236 000	53 100	–	2 400	3 400	7.25	16.00