What is the best way to install FAG angular contact ball bearings?

FAG angular contact ball bearings are mainly used in high-speed rotation occasions with light loads, which require bearings with high precision, high speed, low temperature rise and low vibration and a certain service life. It is often used as a support for high-speed motorized spindles installed in pairs, and is a key accessory for high-speed motorized spindles of internal surface grinders.
Main Specifications:
1.FAG bearing accuracy index: more than GB/307.1-94 P4 level accuracy
2. High-speed performance index: dmN value 1.3~1.8x 106 /min
3. Service life (average): ＞1500 h
The service life of high-speed precision angular contact ball bearings has a lot to do with the installation, the following matters should be paid attention to
1. The installation of FAG bearings should be carried out in a dust-free and clean room, the bearings should be carefully selected, and the spacer rings used for the bearings should be ground. Below 1um;
2. The FAG bearing should be cleaned before installation. When cleaning, the slope of the inner ring should be upward, and the hand feel is flexible and there is no stagnation. After drying, put the specified amount of grease, and if it is oil mist lubrication, put a small amount of oil mist oil;
3. Special tools should be used for the installation of FAG bearings, the force is even, and knocking is strictly prohibited;
4. FAG bearings should be kept clean and ventilated, without corrosive gas, and the relative humidity should not exceed 65%. Long-term storage should be regularly rusted.

HAWOTE Bearing is specialized in supplying precision bearings for many years.

Below is some part numbers for precision bearings. If you are interested,please send us inquiry by email: bella09@hwt-bearing.com